It is unknown at this time why this occurs. Please see the compatibility page for more information: NOTE: This does not imply that the network operating system will work under all combinations of hardware and software. Turbolinux Enterprise Server 8 powered by UnitedLinux.SCO Linux Server powered by United Linux, version 4.0.an IBM eServer xSeries 445, type 8870, any model.The system may be any of the following IBM e(logo)servers: You will not see any menu options or text in the screen, or, if it is a text based system, the cursor may blank on the screen and GRUB will not appear to load at all. ![]() So if nothing else seems to work, switching the monitor cables might do the trick.įunny to see Windows files on their proper places and not have access to the windowsOS.When booting the server from installation media, or booting after the installation from the hard disk or other media, the GRUB screen may appear to be blank. Finally turned on the secondary monitor (it’s usually off) and there was the grub-menu ! I believe i just need to switch the monitor cables around to get it on the main monitor? Believing grub goes to motherboard so sends the info to the monitor attached to it. GRUB v2 is provided since DebianLenny.It is the default bootloader since DebianSqueeze. GRUB v1 is the main 1 default bootloader on x86 platforms (up-to DebianLenny). Debian provides both GRUB v1 and v2 (more on Debian BootLoader). Setting the grub config “hidden” to “visible” and sudo udate-grub at the prompt didn’t help. GRUB is the GRand Unified Bootloader, a very powerful BootLoader that can be used to boot most operating system on the intel platforms. Though Mint is still at top of menu, it now defaults booting. Upon restart, didn’t get the grub menu to show up. Something happened & grub menu stopped displaying. Set up a harddisk partition in windows for Linux and let the Linux installation program do its thing (install keeping windows intact) Rather smooth also, checked the windows was still on it’s partition. Now, reboot Linux Mint, and the GRUB boot menu should appear automatically at startup.Īfter realizing some components in the system need 32-bit info, got the linux mint 19.3 for an old machine. If this option set to menu, then GRUB will display the menu and then wait for the timeout set by GRUBTIMEOUT to expire before booting the default entry. Now, go back to the terminal and type: sudo update-grub In the /etc/default/grub file, set the GRUBTIMEOUTSTYLE to menu or countdown. Now scroll down and remove the hash mark in front of this line: GRUB_GFXMODE=640x480 This timeout configuration setting causes the GRUB menu to automatically choose the selected item after ten seconds. If you like, you can also change the timeout time in seconds. In earlier versions of Linux Mint, the line might look more like this: #GRUB_HIDDEN_TIMEOUT=0 By doing this you are basically disabling the “hidden” configuration of the GRUB boot menu, thus allowing it to appear when Linux Mint starts up. This hash mark “comments out” this line in the configuration file so that it will be ignored by Linux at boot time. Place a hash mark in front of it so that it appears like this: #GRUB_TIMEOUT_STYLE=hidden Scroll down to the following line: GRUB_TIMEOUT_STYLE=hidden If you’re using a different version of Linux Mint, your GRUB configuration file may look different. The above GRUB configuration file appears in Linux Mint 20. The hiddenmenu option hides the boot menu so you need to press a key to get to it, instead showing the example splash screen in the first screenshot above. Scroll down to to the lines that deal with GRUB configuration. But since GEDIT doesn’t come pre-installed with Linux Mint, we must install it first. We are going to use GEDIT to edit the GRUB configuration file. ![]() To set a higher timeout, use something like GRUBHIDDENTIMEOUT5 GRUB will display an empty screen or splash screen for five seconds, during which you can press any key to view the menu. Show Boot Menu by Editing GRUB Config File You can still access the menu by holding Shift as your computer boots. The GRUB boot menu will display with available boot options. Press the keyboard combination Ctrl + X to exit nano. Press the keyboard combination Ctrl + O and after that press Enter to save the change that was made to /boot/efi/loader/nf. sudo nano /boot/efi/loader/nf Add a new line that says timeout 10 Save the file. The following boot menu appears in Linux Mint 20. Open /boot/efi/loader/nf for editing in nano text editor. ![]() If you are using Legacy BIOS, you can display it by pressing the Shift key several times when booting. When you start Linux Mint, simply press and hold down the Shift key to display the GRUB boot menu at startup. If the GRUB menu doesn’t show up when you boot your computer, it may be hidden. You can show the boot menu at startup using the following methods. The boot menu, known as GRUB, is usually disabled by default in Linux Mint.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |